Archive

PLUG SOCKET

Accessory connector to be combined for use in conjunction with wall thermostat, easy to install and use and positioning. Plug in the socket (as with PTR 01.411), completely prewired (see drawing below), can be completed used with room thermostat PTR 01.086.

Product code:XA-PTR2-14

PLUG & PLAY THERMOSTAT

Thermostat for surface-mounted installation or as a ready-to-use device, with 1.5 m cable 1.5 m long, withand Schuko (CEE 7/4) adapter. Controller suited suitable for permanent installation or for attaching to the wall suspension by means of a special adapter plate (2-hole fixing, and drilling jig included in the scope of the delivery). . Devices can be modified for use in There is also the possibility for supplying devices modified for use in Switzerland on request on request (PTR 01.402 CH)

Technical data:

1. Operating voltage: 230V ~, 50/60 Hz
2. Setting ranges: 5…30°C
3. Switching Capacity: 13A/ 230VAC (3000 W)
4. Operation ranges: 5..30 °C, position (1..6)
5. Degree of protection: IP 30
6. Housing material: plastic (ABS)
7. Mounting/ Installation: surface-/ wall-mounted installation
8. Weight: 330 gr

Product code: PTR 01.401

SCHUKO THERMOSTAT

Thermostat for surface-mounted installation or as a ready-to-use device, with 1.5 m cable 1.5 m longand, with Schuko (CEE 7/4) coupling. A preassembled plug-in socket enables allows the controller to be plugged the controller directly into the wall socket.

Technical Data:

1. Operating voltage: 230V ~, 50/60 Hz
2. Setting ranges: 5…30°C
3. Switching Capacity: 13A/ 230VAC (3000 W)
4. Operation ranges: 5..30 °C, position (1..6)
5. Degree of protection: IP 30
6. Housing material: plastic (ABS)
7. Mounting/ Installation: surface-/ wall-mounted installation
8. Weight: 330 gr

Product code: PTR 01.411-14

FLUSH THERMOSTAT

Thermostat for flush-mounted installation, break contact, switching capacity 3000 Watt, insulated cover, protective cap, for direct electrical heating systems, such as marble heating systems and others, 230 V ~ Note: At heating output > 1,500 W, do not connect terminal 4. Combined Used in conjunction withwith Alre “Berlin” controller, – glossy, pure white, with alre “Berlin” frameframe (neutral) and, 50 x 50 mm cover, pure white , glossy.

Technical Data:

1. Operating voltage: 230 V ~, 50 Hz
2. Setting ranges: 5 … 30 °C (scale in °C)
3. Switching Capacity: 13 A/ 230 VAC
4. Operation ranges: 5..30 °C, position (1..6)
5. Housing material: plastic (ABS)
6. Mounting/ Installation: surface-/ wall-mounted installation
7. Weight: 1150 gr

Product Code: FTR 101.086-21

THERMOSTAT with LED

For surface-mounted installation – Design Berlin 2000. Suitable for infra-infrared heating systems.

Technical Data:

1. Operating voltage: 230V ~, 50/60 Hz
2. Setting ranges: 5…30°C
3. Switching Capacity: 13A/ 230VAC (3000 W)
4. Operation ranges: 5..30 °C, position (1..6)
5. The degree of protection: IP 30
6. Housing material: plastic (ABS)
7. Indicator: YES
8. Mounting/ Installation: surface-/ wall-mounted installation
9. Weight: 330 gr

Product code: RTBSB-001.096

ANALOG THERMOSTAT

BIMETAL ROOM TEMPERATURE CONTROLLER PTR

For surface-mounted installation or as a ready-to-use device. Break contact, 3000 W switching power, for electric radiator heating systems, e.g. marble radiators.

Technical data:

1. Operating voltage: 230V ~, 50/60 Hz
2. Setting ranges: 5…30°C
3. Switching Capacity: 13A/ 230VAC (3000 W)
4. Operation ranges: 5..30 °C, position (1..6)
5. Degree of protection: IP 30
6. Housing material: plastic (ABS)
7. Mounting/ Installation: surface-/ wall-mounted installation
8. Weight: 330 gr

Product code: PTR01.086-14

WIRELESS ALRE THERMOSTAT

Sensor (transmitter) for the acquisition of room temperatures and for the radio transmission of the sensed data to the controller (receiver) including a clock. Simple operation by dedicated function keys for ON / OFF, holiday mode, party mode, the setting of the desired operating mode and for information pertaining to all actual settings. Temperature setting knob with °C scale. Indication of temperature/time, summer- / winter time changeover, child protection, valve protection, and self-adapting mode (can be deactivated), Berlin 3000 design housing, suited as a master for master-slave operation, without backlight. The Transmitter transmitter is combined used in conjunction with Alre HTFRB-010.101 the wireless receivers Alre HTFRB-010.101.

Technical Data:

1. Operating Voltage: 2ΧΑΑΑ, 1,5V / 1.000, 5 mAh
2. Sensor:NTC (internal)
3. Setting ranges:5 … 30 °C
4. Transmit frequency: 868.3 MHz
5. Radio transmission distance: within the line of sight (150 m),up to 30 m in buildings(depending on construction method)
6. Transmit interval: around 3 minutes and on changing the reference temperature
7. Ambient temperature: – 10 … + 50 °C
8. Degree of protection: IP 30
9. Housing material: plastic (ABS)
10. Admissible air moisture: max. 95 % r. H., non condensing

Product code: FTRBU 180.117

THERMOSTAT ALRE

Room temperature controller with the clock: Simple operation by dedicated function keys for ON / OFF, holiday mode, party mode, the setting of the desired operating mode and for information pertaining to all actual settings.Temperature settings. Temperature setting knob with °C scale, self-adapting function (can be deactivated), without backlight.

Technical Data:

1. Operating voltage: 230 V ~, 50 Hz
2. Setting ranges: 5 … 30 °C (scale in °C)
3. Switching Capacity: 8 A/ 230 VAC
4. Operation ranges: -20…70 °C
5. Degree of protection: IP 30
6. Housing material: plastic (ABS)
7. Admissible air moisture: max. 95 % r. H.
8. Indicator: YES
9. Mounting/ Installation: surface-/ wall-mounted installation
10. Weight: 250 gr

Product code: HTRRBu 110.117/21

THERMOSTAT RDE10

The controller acquires the room temperature with its integrated sensor and maintains the setpoint by delivering control commands. The RDE10 provides normal operation and, optionally, an energy saving mode or OFF. The difference between the normal operation and the energy saving mode is only the room temperature setpoint. The changeover between the operating modes can be made either automatically according to the 7iday 7-day time switch, or manually with the operating mode selector.

Technical Data:

1. Operating Voltage: DC 3 V, 230 V AC or 50/60 Hz
2. Confirmation Signal: two -positional
3. Environmental Conditions; Perm. Ambient Temperature; Operation: 0…50 ºC
4. Setpoint setting range: 5…35 ºC
5. Switching capacity of relays; Voltage: AC 24….250 V
6. Switching capacity of relays; Current: 5 (2) A
7. Protection: IP 30
8. Dimensions (W*H*D) : 119*96*24 mm
9. Material: Plastic ABS
10. Acceptable Humidity: max 95%

Product code: RDE 10..